View Cart
About
My Account
Log Out
Knowledge Base
Call:
800-447-4717
Monday-Fri 8:30am-5:00pm EST
Email:
oidirect.us@oxinst.com
Home
>
Optical Cryostat Systems
>
Fast track MicrostatN2
Alternative Views:
Fast track MicrostatN2 system including:
MICRON MicrostatN2 cryostat
MNSH1Plain sample holder
MNSH2 optical sample holder
QNR05 0.5 mm thick, 10 mm clear dia. Spec B quartz window fitted to a top flange
TTLMIC Transfer tube
MERC-TC_V Temperature controller
CC1 3 m cryostat cable
GF4 Gas flow pump ( requires V-U for LN2 operation)
VC-U Gas flow controller with helium and nitrogen flowmeters
ND2 Nitrogen dewar 5L dewar supplied with fennel
Our Price:
(Members Only)
Product Code:
FTMICRONA
Wiring
No wiring
LX4 [Add (Members Only)]
Pumps
High vacuum pump
*
:
RP15 1.5 m3/hr pump and line [Add (Members Only)]
Qty:
Description
Technical Specs
Extended Info & Downloads
Nitrogen cooled cryostat for microscopy:
>77K-500K
>Continuous flow
>Short working distance (3 mm)
>Sample in vacuum
Fast Track MicrostatN2 liquid nitrogen cryostat for microscopy and optical spectroscopy:
> Sample in vacuum cooled by mechanical contact with heat exchanger
> Working distance down to 2 mm; numerical aperture of 0.92 for reflectance measurements
> Designed to give positional stability of the sample holder of approximately 1micrometer. The stability is neither measured nor guaranteed and will be dependent on the final system configuration and the environment in which the equipment is used.
> Temperature range 77K- 500 K (measured at the heat exchanger)
> Temperature stability using MercuryiTC : 80 -120 K, +/- 1.0 K; 120 - 500 K, +/- 0.5 K (measured over a 10 min period)
> Heat exchanger fitted with heater and platinum resistor sensor
> Cool down time from room temperature ? 10 min
> Liquid nitrogen consumption rate : 0.5 L/hr
> Sample change time 30 min. (to change samples cryostat is warmed up and vacuum released)
> Weight 0.4 kg
> Copy of Oxford Instruments Safety Matters
> Operators manual
Also included:
> 1 Off MNSH1 flat, plain sample holder
> 1 Off MNSH2 flat, optical sample holder, 10 mm clear aperture
> 1 Off QNR05 optical access port for reflection measurements fitted with 0.5 mm thick, 10 mm clear diameter Spec. B quartz window
> TTLMIC Transfer tube
> MercuryiTC temperature controller
> CC1 3m cryostat cable -10 pin connector
> GF4 Gas flow pump (requires VC for LN2 operation)
> VC-U Gas flow controller
> ND2 Nitrogen dewar
To find out more about the MicrostatN, please download the product guide by
clicking here
.
Specifications
>Wide temperature range: from 77 K to 500 K
>Extremely compact: 90 mm diameter by 24 mm thickness. Only 400 g!
>Economical use of cryogens: less than 0.5 L/h
>Quick cooldown: 80 K in less than 10 minutes
>Adjustable sample holders accomodate samples up to 8 mm thickness
>Easy integration into commercial microscopes facilitated by its compact size and
short working distance (as low as 3 mm).
>Interface plate available as option for attaching the MicrostatN2 directly onto microscope translation stage
>Suitable for reflection and transmission experiments via choice of sample holders
>Electrical measurements via 4-pin electrical feed wire to heat exchanger
Related Items
Helium cryostats with sample in vacuum
Fast track MicrostatHe2
Nitrogen cryostat
Fast track MicrostatHires2
Our Price:
(Members Only)
Our Price:
(Members Only)
Our Price:
(Members Only)
Our Price:
(Members Only)
Fast track OptistatDN2 nitrogen cryostat
Fast track OptistatCF2
Our Price:
(Members Only)
Our Price:
(Members Only)
Share your knowledge of this product.
Be the first to write a review »
