View Cart
About
My Account
Log Out
Knowledge Base
Call:
800-447-4717
Monday-Fri 8:30am-5:00pm EST
Email:
oidirect.us@oxinst.com
Home
>
Optical Cryostat Systems
>
Fast track MicrostatHe2
Alternative Views:
Fast track MicrostatHe2 system including :
COLDUNIT Cooling unit
MICROTAIL Tail set for Microstat He2
VH1 Plain flat sample holder
VH2 Optical sample holder
LLT600/13 Flexible gas shielded trasfer tube low loss transfer tube
SV12 Storage vessel adaptor
MERC-TC_V MercuryiTC temperature controller
CC1 3m cryostat cable
GF4 Gas flow pump(requires VC for LN2 operation)
VC-U Gas flow controller
SKHE Spares kit
Our Price:
(Members Only)
Product Code:
FTMICRO
Window flanges
Top window MicrostatHe2
*
:
QOVC 15M2 Spectrosil B quartz. 1.5 mm thick, 25 mm dia. [Add (Members Only)]
QOVC 05M2 Spectrosil B quartz. 0.5 mm thick, 10 mm dia. [Add (Members Only)]
Bottom window MicrostatHe2
*
:
QOVC 15M2 Spectrosil B quartz. 1.5 mm thick, 25 mm dia. [Add (Members Only)]
QOVC 05M2 Spectrosil B quartz. 0.5 mm thick, 10 mm dia. [Add (Members Only)]
MHEWB Blank flange [Add (Members Only)]
Dewars
Dewar:
No helium dewar
30 litre helium dewar [Add (Members Only)]
Wiring
No wiring
LX10 Wired pin seal [Add (Members Only)]
CX1 Wired coax connector [Add (Members Only)]
2x CX1 Wired coax connectors [Add (Members Only)]
Pumps
Gas flow pump:
GF4 (incl in package)
Replace Gas flow pump by 40m3/hr helium pump(lower base temp) [Add (Members Only)]
High vacuum pump
*
:
Turbo pumping kit including vacuum gauge [Add (Members Only)]
No high vacuum pump
Qty:
Description
Technical Specs
Extended Info & Downloads
Helium cooled continuous flow cryostat for microscopy applications:
>2.2K-500K
>Min 4.5 mm working distance
> <0.1 micrometer vertical vibration
COLDUNIT cooling unit for Optistat CF-V2 and Microstat He2 with:
Heater and calibrated 3 point rhodium iron sensor fitted to heat exchanger
Temperature range:
3.2 K - 500 K (with GF4 pump)
2.2 - 500 K (with EPS40 pump)
Temperature stability:+/- 0.1 K using an ITC controller (measured over a 10 min period)
Cool down time from room temperature 10 min
Cool down consumption <1.3 L
Liquid helium consumption of COLDUNIT with CFVTAIL, MICROTAIL or MICRORTAIL, <450 cc/hr at 4.2 K
System may also be run with liquid nitrogen, temperature range 77 K-500 K
Note 1: sample holder not included
Note 2: All specifications refer to the standard system using a standard length LLT transfer tube and a GF4 pump
Notes:
1. System will be tested with the ordered pump(s) only. In the case that no pumps are ordered then the system will be tested with a GF4 pump only.
2. OINS can only guarantee the performance below 3.0K if a calibrated 30 point RhFe sensor is purchased and fitted.
To find out more, please download the Microstat product guide by
clicking here
.
Specifications
Wide temperature range :2.2 K to 500 K
Easy integration into commercial microscopes facilitated by its compact size and short working distance (as low as 4.5 mm).Interface plate available as option for attaching the MicrostatHe2 directly onto microscope translation stage
Economical use of cryogens: the lowest consumption on the market using only 0.45 l/hr at 4.2 K
Rapid cooldown time: 4.2 K in less than 10 minutes!
Suitable for reflection and transmission experiments via choice of sample holders
Adjustable working distance via sample holder. Can be adjusted to less than 3 mm
Interchangeable tail between the OptistatCF-V, MicrostatHe2 and MicrostatHe2 Rectangular tail
Can be used with liquid nitrogen
Electrical measurements via 10-pin electrical feed wire to heat exchanger. >Optional coaxial cables
Related Items
Helium cryostats with sample in vacuum
Fast track MicrostatHires2
Nitrogen cryostat
Fast track MicrostatN2
Our Price:
(Members Only)
Our Price:
(Members Only)
Our Price:
(Members Only)
Our Price:
(Members Only)
Fast track OptistatDN2 nitrogen cryostat
Fast track OptistatCF2
Our Price:
(Members Only)
Our Price:
(Members Only)
Share your knowledge of this product.
Be the first to write a review »
